Whether your renovating, redecorating, or replacing door casings, at some point you may need to remove architrave. This is a relatively simple job. However, it does come with the small risk of damaging the surrounding plaster. If your goal is to remove the architrave without damaging the plaster, you will need to take several steps …
How to remove architrave without damaging plaster – Step by step Read More »
Skirting boards can be fixed in several different ways. The exact method of fixing will depend on the surface you are fixing too. However, screws are almost always an option. The best screws for fixing skirting boards are countersunk multi-purpose screws. The ideal length is between 50-65mm. A shorter screw will be fine if you …
Best screws for skirting boards – Plus other fixing methods Read More »
When fixing skirting boards to walls, it is best practice to use a combination of adhesive and mechanical fixings. The best adhesive for skirting boards is a general grab adhesive. This gives you a number of different brands to choose from, and the price range can vary significantly. However, a cheap adhesive, such as Gripfill …
In this article, we will be looking at boxing in pipes with skirting board. This will include the most common reasons you may need to do this. As well as how you can install this type of pipe boxing. In an ideal situation, plumbing pipes run under floorboards and inside stud walls. So, for the …
Boxing in pipes with skirting board – Process explained Read More »
If you’re looking to sand skirting boards and repaint, then you may be considering the best way of doing this. One option, is to use an electric sander. However, there are several different types of sander on the market, and not every type is suitable for this type of work. In most cases, the best …
Best sander for skirting board – What should you use? Read More »
Architrave is a decorative feature, which is used to cover the gap between door frames and the surrounding wall. This gives a neat and aesthetically pleasing finish. Architraves are nailed in place and will often have a grab adhesive on the back, as well as wood glue on the mitred corners. There are a few …
